The D-R5 wireless earpiece is a revolution in covert communications technology with a physical profile so small that it can be fitted deep into the ear canal making it imperceptible by others as well as comfortable for use in the most challenging special operations. 3 variants available :Afro-Caribean, Beige and Dark European color.
The standard Discreet Pedestrian Kit includes an interface and smartphone headset. With the online microphone and PTT (on headset), the user can discreetly use TPH900, as if it were a smartphone instead. It includes: Interface unit. Smartphone headset with online microphone and PTT.
This kit is dedicated for VIP close protection. The ear interface is based on an acoustic tube as usual. A second wire with PTT and microphone is plugged into the interface for clear and loud speach. It includes: Discreet interface. Acoustic audio headset without online microphone. Wired PTT.and microphone
This kit is dedicated for VIP close protection. The ear interface is based on an acoustic tube as usual. It includes an online microphone. A second wire with PTT is plugged into the interface. it includes: Discreet Interface. Acoustic audio earset with online microphone. Wired PTT.
This kit is dedicated for semi-covert surveillance, where no channel change is requested during operation. Includes: Discreet interface. Induction loop with microphone. Digital earpiece. Wired remote PTT.
Heavy duty headset connected directly to the TPH700 Ex. ATEX certified (same level as the TPH700 Ex). PTT integrated on the headset shell. Boom speaker microphone. 3 variants available.
Heavy duty headset - AL-A-7ex - Safety helmet adaptor
Heavy duty headset connected directly to the TPH700 Ex. Large PTT on the cable with a clip. ATEX certified (same level as the TPH700 Ex). Boom speaker microphone. 3 variants available.
Heavy duty headset connected directly to the TPH700 Ex. ATEX certified (same level as the TPH700 Ex). PTT integrated on the headset shell. Boom speaker microphone. 3 variants available.
Heavy duty headset connected directly to the TPH700 Ex. ATEX certified (same level as the TPH700 Ex). PTT integrated on the headset shell. Boom speaker microphone. 3 variants available.
Heavy duty headset connected directly to the TPH700 Ex. Large PTT on the cable with a clip. ATEX certified (same level as the TPH700 Ex). Boom speaker microphone. 3 variants available.
Heavy duty headset connected directly to the TPH700 Ex. Large PTT on the cable with a clip. ATEX certified (same level as the TPH700 Ex). Boom speaker microphone. 3 variants available.
The neck loop uses audio signal modulation scheme that uses carrier frequencies within the audio band and as a result it avoids the possibility of user detection by keeping the link between accessory to earpiece secure (HR9350--). With 5-pin Lemo adapter.
The remote speaker microphone is designed to deliver optimal performance with the TPH900 radio terminal. The speaker microphone is a robust accessory offering great voice quality together with the important controls for PTT, volume and emergency call. The accessory has a 360° turning clip with eight positions.Key characteristics Omnidirectional microphone
Loudspeaker: 8 Ohms Ø 45 mm Padm 2 W
1 LED showing the status of the communication Volume control:Separated buttons for increasing and decreasing the volumeMicrophone can be muted by pressing the volume controls simultaneously 1 button for ending a communication
ATEX certified (same level as the TPH700 Ex). Remote speaker microphone that can be used alone or with various plug-in accessories through a jack connector.
Remote speaker microphone is the one used in CCB900 [HR9035BA]. Connectivity is SUBD15 high density. When the user presses the volume +/-, it interacts directly with TPH900 audio volume.
A stereo type headset can be plugged into the 3.5 mm jack plug. Through the headset, the user can get in ear audio; when necessary, he/she will speak in the RSM microphone. Kit of 10 pieces.
The WCU is designed to pair and connect to TPH900. It is powered with an internal 3.7V 170mA/HR Li-ion battery. Features: Channel change and talk group select. PTT increase/decrease volume. Emergency Hang up.
The original TPH900 high capacity battery ensures the best user experience and operational safety in the field. This is the only battery tested and supported by Airbus DS for the TPH900. The battery is composed of: 2 Lithium-Ion cells assembled in parallel, a hard plastic casing equipped with 2 3-contact areas, PADs and a locking system. One Protection Circuit Module (PCM). The battery weighs 110 g. Kit of 20 pieces 4700MAH batteries.
The original TPH900 high capcity battery ensures the best user experience and operational safety in the field. This is the only battery tested and supported by Airbus DS for the TPH900. The battery is composed of: 2 Lithium-Ion cells assembled in parallel, a hard plastic casing equipped with 2 3-contact areas, PADs and a locking system, one Protection Circuit Module (PCM). The battery weighs 110 g. Kit of 5 pieces 4700MAH batteries
Temperature range for use: 0°C to 45°C (charging mode not possible outside this range).
Storage temperature (not including battery pack): -40°C//+80°C.
Weight = 950g with mains power supply unit. Dimensions: Width: 116 mm. TPH900 1+1 DSK charger V2 EU plug. Length: 145.1 mm. Height: 63.5 mm. Maximum charge time for a spare battery pack: about 4H30 mn. For a battery pack inside the handheld: 5H.
Desktop charger for stand-alone battery and the TPH700. Battery life optimization process. Charge level on the handheld screen, LED for battery. Simultaneous charge completed in 4 hours. Compatibility:TPH700 and TPH700 Ex terminals.
The TPH900 desktop charger consists in a mechanism with side interfaces, so it can be plugged to another 1+1 up to a 6+6 multicharger. The chargers can be connected between themselves by slide-and-block system from top to bottom.Desktop slot with removable side covers, for multiple configuration.No power supply
6+6 slot charger with quick charging for up to 6 TPH700s and batteries. Battery life optimization process. Charge level on the handheld screen. Compatibility:TPH700 and TPH700 Ex terminals.
The TPH900 desktop charger consists in a mechanism with side interfaces, so it can be plugged to another 1+1 up to a 6+6 multicharger. The chargers can be connected between themselves by slide-and-block system from top to bottom. 2+2 up to 6+6 multislots configurations, wall plug cable.
The TPH900 desktop charger consists in a mechanism with side interfaces, so it can be plugged to another 1+1 up to a 6+6 multicharger. The chargers can be connected between themselves by slide-and-block system from top to bottom. Desktop charger for six terminals and six batteries.
The travel charger makes sure that your radio receives enough power where simple wall plug charging is needed. It is easy to carry and to keep with you. The charger has a Europlug (CEE 7/16) and a connector compatible with the bottom-connector of the TPH900 radio.
Standard travel charger for TPH700. Battery life optimization process. Charge level displayed on the handheld screen. Compatibility: TPH700 and TPH700 Ex terminals.
This harness mounts the terminal by using the Klick Fast quick release system in the centre of the chest and incorporates nylon straps that slip over the arms and shoulders. Related accessories:Klick Fast system.
Pivot TPH700Ex. Connects directly to the belt clip screw holes on the back of the radio. To be used with Belt Mounting Docks, Retro Fitting Clothing Dock, Leather Belt Loop with Klick Fast dock and the Extra long leather Belt Loop with Klick Fast Dock. Kit of 10 pieces.Related accessories: Klick fast dock accessories
Clothing dock, Leather belt loop
Pivot for Carrying, Kit 50x metal pivot with 100x 18 mm screws
The metal pivot enables the use of various varying solutions. It is compatible with existing TPH900 carrying solutions, such as, belt loop or shoulder strap products.The pivot element can be attached with two screws to the TPH900 housing after removing the battery. The screws are included in the sales package.
Pivot for Carrying, Kit of 50x metal pivot + 50x Belt loop
The metal pivot enables the use of various varying solutions. It is compatible with existing TPH900 carrying solutions, such as, belt loop or shoulder strap products.The pivot element can be attached with two screws to the TPH900 housing after removing the battery. The screws are included in the sales package.
Pivot for Carrying, Kit of 5x metal pivot + 5x Belt loop
The metal pivot enables the use of various varying solutions. It is compatible with existing TPH900 carrying solutions, such as, belt loop or shoulder strap products.The pivot element can be attached with two screws to the TPH900 housing after removing the battery. The screws are included in the sales package.
Red Leather Belt Loop that fits up to 90mm belt, cases can be attached to the Belt loop via the Klick Fast Dock. The Belt loop has one way opening. Press studs to allow the loop to be fitted to the belt without undoing the buckle
Validated to be used in explosive environment according to ATEX regulations. Made with special material to protect against ESD effects. Rugged rings for shoulder strap.
TPH900 car cradle is specific to TPH900, as any cradle is to one radio.The product offers the following features: Power supply to the terminal. Connection to external antenna with one antenna cable dual band (Tetrapol and GPS). USB port for data connection. The product is IP40.
TPH900 car cradle is specific to TPH900, as any cradle is to one radio.The product offers the following features: Power supply to the terminal. Connection to external antenna with one antenna cable dual band (Tetrapol and GPS). USB port for data connection. The product is IP40.
The main features of the CCB900 are: Interface between the cradle, the BIV SmartInterface to external antenna, PMR antenna, or dual band PMR/GPS antenna. Management of audio links: to/from Remote Speaker Microphone, loudspeaker, Power supply management for TPH900 5V - 4A (vs 6.5V for P2G)The product is IP40.
Remote speaker microphone is the one used in CCB900 [HR9035BA]. Connectivity is SUBD15 high density. When the user presses the volume +/-, it interacts directly with TPH900 audio volume.
The data USB cable provides a USB data connection between a TPH900 radio terminal via its bottom connector and a PC. The data cable is designed for testing data applications in laboratory environments as there is no locking mechanism in the bottom connection.Box of 5 units
The NFC dongle is an option to ease and to secure the Bluetooth pairing and the Bluetooth connection. With the cable included in the kit, it connects to the back side of the TM-CU. Alternatively, it could be connected directly to the BERe with a standard USA-A (female / USB-C) cable.
The TPS hub is an industrial grade unit that meets demanding industrial EMC standards allowing it to operate in environments where standard office hubs fail. This hub has been tested and qualified by Airbus DS in order to provide the best performance when used for programming TPH900 radios.High retention USB connectors hold the TPS USB cables tight and ensures good connectivity despite possible vibrations in the environment.TPS hub includes two power connectors: one terminal block and one threaded / lockable barrel plug. Each downstream port provides up to 500 mA of power to connected USB devices. 4kV Isolation
High retention USB connectors
ESD Protection - 15 kV Air
Rugged Metal Case
Wide Operating Temperature (-40 to 80°C)
USB 2.0
Panel Mount Brackets & DIN Rail clip Industrial grade USB hub7 x TPS USB cables1 x hub-PC cable
The Wireless Audio Hub allows you to control discretly the terminal via bluetooth (sending PTT, tuning the audio volume). Various audio devices listed below can be connected with a 3.5 jack. A charger for the 600mA.h internal Li-Ion battery is included in the pack. GSM like headset: HR9317AA / Speaker + sound tube: HR9627AA / Smartphone type headset: HR9624AA / Induction loop kit: HR9628AB. Additional wireless PTT, to connect on top of the Wireless Audio Hub (via 868MHz link): HR10274AA.
